Monday, 28 May 2018

Mick George fined £566,000 after tipper hits power line

Contractor Mick George Ltd has been fined after a tipper vehicle driven by one of its employees came into contact with overhead power lines during the construction of a waste transfer station.

Northampton Crown Court heard that on 9 March 2016 a driver employed by Mick George Ltd was emptying a load of soil from his tipper vehicle at a site in Northampton.

Mick George Ltd had already identified the need for Permanent Protection Structures (goalposts) but after an initial delay only one was installed.

In order to empty the final remains of the load from his vehicle, the driver pulled forward with the body raised and the vehicle touched, or came close to touching, the 33KV overhead power lines (OPL).

The tipper vehicle suffered minor damage but the driver was unhurt.

An HSE investigation showed that Mick George Ltd should have assessed the risks from OPL’s more rigorously and realised its system of work was inadequate to reduce the risk of tipper vehicles striking an OPL.

Mick George Ltd of Huntingdon pleaded guilty to a breach of the CDM regulations and was fined £566,670 and ordered to pay costs of £9,000.

HSE inspector Stuart Parry, speaking after the sentencing said: “Every year in the UK, two people are killed and many more injured when mechanical plant and machinery comes into contact or close proximity to OPLs.

“This was a very serious incident and it is fortunate nobody was injured as a result.

“A suitable and sufficient assessment would have identified the need to contact the Distribution Network Operator, Western Power, to request the OPLs were diverted underground prior to the commencement of construction.

“If this was not reasonably practicable, Mick George Ltd should have erected goalposts either side of the OPLs to warn drivers about the OPLs. “



from Construction Enquirer http://www.constructionenquirer.com/2018/05/28/mick-george-fined-566000-after-tipper-hits-power-line/

via Tumblr http://ndbasilica.tumblr.com/post/174345364049

No comments:

Post a Comment